TTD Masking Tape, Heat Transfer Making Tape

Regular price $1.75

12x12 sheet of Siser transfer tape is used for the Printed Heat Transfer Vinyl to lift the graphics to be pressed.

****Directions-****
1. Cut a piece of mask slightly wider than the image to cover.
2. Remove the paper backing from the mask and set aside.
3. Adhesive side up, place the mask down on a smooth, firm surface.
4. With the image facing down, center it over the mask letting the middle drop down
onto the adhesive, followed by the rest of the image.
5. Place your squeegee at a 45° angle over the center of the image. Using firm pressure, push the squeegee towards the outer edge of the image. This removes any trapped air creating a bond between the image and the mask.
6. Repeat this process in several directions.
7. Lift a corner of the mask, use a steady motion to seperate the mask from the image.
8. If not using immediately, place the transferred image back on the shiny side of the original masking paper you had set aside.
HINT: It is usually possible to get multiple uses from one sheet. After use, return premask to paper backing to store.
Applies to Cotton, Cotton/Polyester, or Polyester Material.